Clearance

Here is your opportunity to save big on our overstocked epoxy items and cedar strip offcuts.


Short strips:

We manufacture cedar strips here and after a while we build up a quantity of short strips. These 'shorts' are the result of a knot or blemish in a longer strip that is culled out. Physically these shorts are the same as our longer strips but with more color variation. This is Northern White Cedar, very lightweight and flexible.

Here is what we currently have for "Shorts":

3', 4' and 5' northern white cedar packaged in bundles of 28 strips. Your cost is $.35 per lineal foot of strip material (compared to $.55/lineal foot for longer material). Multiply the amount in a bundle (28) x length to get the lineal footage.

Sold in 28 strip bundles only. That's 84 lf for 3', 112 lf for 4', and 140 lf for 5'.

Email us (info@newfound.com) or call, 603-744-6872 and tell us what you would like. These are sold by bundle only. Many builders use these to supplement strips they already have or to build small curvy projects, like canoe coffee tables.

 

Northern White Cedar


We have several quarts/pints of System Three SilverTip Easy Fillet, Quick Fair, Clearcoat, and Gel Magic. Here's what we have, the retail and the sale prices:

Material Type
Size
Retail
Clearance Price
Clearcoat 1-1/2 pints
$36.50
$17.00
EZ Fillet 1-1/2 pints
$24.75
$12.00
EZ Fillet 1-1/2 quarts
$42.25
$20.00
Gel Magic 12 oz
$19.50
$9.00
Quik Fair 1-1/2 pints
$28.00
$13.00

Descriptions, pictures and uses for these products are below. Note that these are epoxy products and must be shipped FedEx Ground.

Order here.

 
qty
 
Clear Coat Laminating Resin
Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents.

Recommended Uses:
Clear Coat is ideal for clear coating wood, and the wetting out of fiberglass cloth for bright finished boats. Use as a build coat for clear linear polyurethane or varnish coatings and as a penetrating first coat for blister repair on fiberglass boats. Use also for those applications that require a long pot life and low viscosity. Use Clear Coat as the sole epoxy system to make wood strip canoes and kayaks. Protect Clear Coat from moisture during cure to avoid water spotting.

 
SilverTip EZ-Fillet
EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick red in color while the hardener (part B) is a deep, dark green. A rich brown wood tone results when the two parts are combined indicating complete mixing. The putty thickens after mixing to form an easy to spread thixotropic compound which will not run or sag.
Recommended Uses:
EZ-Fillet is specifically designed for both cosmetic and structural fillets in stitch- and-glue wooden boat construction.
 

SilverTip GelMagic
GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which form a soft, thixotropic, sag-resistant paste when mixed. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies.

Recommended Uses:
Specifically designed for optimum adhesive properties. Not a general-purpose resin made for coating and then modified with filler to act as an adhesive. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. GelMagic is ideal for stitch-and-glue, plywood, strip built and glued lap strake construction. Also use GelMagic as a high strength, gap filling, waterproof adhesive for general woodworking and architectural applications.

 

SilverTip QuikFair
QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 25°C (77°F) QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.

Recommended Uses:
Use QuikFair on both fiberglass and wood-epoxy boats above or below the waterline.

 


The Newfound Woodworks, Inc. © 2006 - 2009