System Three SilverTip Marine Epoxy

This low viscosity resin is used with any of the hardeners listed below. The resin to hardener ratio is always 2 to 1. The hardeners can be blended to modify your cure times depending on your work shop temperature and your time frame requirements

Please Note: All epoxy and varnish supplies must be shipped through FedEx Ground. For an accurate shipping estimate, please select FedEx Ground on the shipping screen.

This No Blush hardener works well in a temperature range of 65 to 90 degrees. At 65 degrees you will have a 10 hour green cure stage that will allow you to recoat without sanding or washing. The next coat will chemically bond to the uncured epoxy.

Please Note: All epoxy and varnish supplies must be shipped through FedEx Ground. For an accurate shipping estimate, please select FedEx Ground on the shipping screen.

You can blend this hardener with the slow hardener to customize your cure time OR you can use this Fast Hardener by itself in situations where you want to achieve a fast, sandable cure within 24-36 hours. This is a non-blushing Fast Hardener.

Please Note: All epoxy and varnish supplies must be shipped through FedEx. For an accurate shipping estimate, please select FedEx on the shipping screen.